ANX7433 is a USB 3.2 Gen2 10G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7433 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. ANX7433 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) USB-C data-only applications are fully supported by ANX7433 with built-in intelligent switching. With the intelligent digital switching, ANX7433 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Other Features
Built-in re-timer
Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master
TCPC-compliant hardware interface
Supports DFP USB-C applications
Dedicated control signals for VBUS Source FET
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and retimer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
10G Active Mux (4x4) with Integrated Re-timers for U5B3.2/DisplayPortTM
Overview:
ANX7451 is a 4x4 re-timing mux capable of switching DisplayPort (DP) and USB3.2 Gen 2 10Gbps signals to support a single USB Type-C™ (USB-C™) port. ANX7451 has built-in re-timers to recover both the USB and DP signals with loss compensation of 23dB for USB and up to 27dB for DP. ANX7451 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 high-speed operation. Host (source) and device (sink) applications are fully supported by ANX7451 with built-in intelligent switching. With the intelligent digital switching, ANX7451 ensures the enhanced signals from the retimers are preserved and outputted over the USB-C connector. ANX7451 integrates the local reference clock and SBU/AUX mux for switching DP AUX signals and reducing overall system BOM cost.
Main Features:
Other Features
Built-in re-timers
Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E)
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
Integrated mux
Integrated (4x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through GPIO of FLIP/USB_EN/DP_EN pins)
Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals
Integrated reference clock
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB3.2 specification, Appendix E
DisplayPort 1.4a specification
USB Type-C r1.2 specification
Intel USB3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
LGA-34, 3.3mm x 4.8mm, 0.71mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Accessories
Notebook/Desktop PC
Storage/Server
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
LGA-34, 3.3mm x 4.8mm, 0.71mm Z-height, 0.35mm pin-pitch
10G Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPortl.4
Overview:
ANX7443 is a re-timing mux capable of switching DisplayPort (DP) and USB3.2 Gen 2 10Gbps signals to support a single USB Type-CTM (USB-CTM) port. ANX7443 has built-in re-timers to recover both the USB and DP signals with loss compensation of 23dB for USB and up to 27dB for DP. ANX7443 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timer eliminates jitter transfer and guarantee Gen 2 high-speed operation. Host (source) and device (sink) applications are fully supported by ANX7443 with built-in intelligent switching. With the intelligent digital switching, ANX7443 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector. ANX7443 integrates the local reference clock and SBU/AUX mux for switching DP AUX signals and reducing overall system BOM cost.
Main Features:
Other Features
Features
Built-in re-timers
Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E)
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
Integrated mux
Integrated (6x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through GPIO of FLIP/USB_EN/DP_EN pins)
Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals
Integrated reference clock
Serial control interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB3.2 specification, Appendix E
DisplayPort 1.4a specification
USB Type-C r1.2 specification
Intel USB3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Notebook/Desktop PC
Package:
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
10G Active Mux (1x2) with Integrated Re-timer for USB 3.2
Overview:
ANX7431 is a USB3.2 Gen2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7431 also integrates a mux (lx2) for USB Type-C™ (USB-C™ ) applications. ANX7431 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7431 with built-in intelligent switching. With the intelligent digital switching, ANX7431 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Other Features
Features
Built-in re-timer
Integrated re-timer for USB 3.2 up to Gen2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-El
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through 12C commands from external 12C master (or, optionally through FLIP/USB_EN pins)
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C rl.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V 1/0 power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Accessories
Notebook/Desktop PC
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7678 is an ultra-low power 4K Ultra-HD (4096x2160p60) SlimPort® transmitter designed for embedded applications, such as, virtual reality, docking stations, and other embedded DisplayPort™ applications with internal displays. The ANX7678 converts HDMI™ 2.0 to DisplayPort 1.3 Ultra-HD (4096x2160p60). Overall, the ANX7678 is designed to provide an internal DisplayPort connection between the HDMI interface and the internal DisplayPort panel. For virtual reality applications, the ANX7678 is a companion device to the ANX7530 (DisplayPort to Dual-MIPI) bridge converter.
Main Features:
Other Features
Standard compliance
DisplayPort1.3, HDMI2.0/1.4b, HDCP 1.4 receiver
DisplayPort transmitter
DisplayPort transmitter (2-lanes @6.75Gbps)
Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rates
Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
Stereo (3D) video output support
AUXP and AUXN support
HDCP1.4 receiver support
HDMI 2.0 receiver
Supports max pixel clock rates up to 600 Mpixels/sec
Up to 36bpp color depth support
Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
Up to 8-channels digital audio support
System operation
Reference input clock: 27MHz
Slave I2C device control interface
Built-in video BIST patterns and audio tone generator for system self-test
HDMI to USB Type-CTM Bridge (Port Controller with MUX)
Overview:
ANX7688 is an ultra-low power 4K Ultra-HD (4096x2160p60) mobile HD transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, etc. ANX7688 supports simultaneous audio, video, and data transfer from a mobile device. ANX7688 converts HDMITM 2.0 to DisplayPortTM 1.3 Ultra-HD (4096x2160p60) including an intelligent crosspoint switch to support USB Type-CTM (USB-CTM). The integrated crosspoint switch supports USB 3.1 data transfer along with the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, an on-chip microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol support and other functions as defined in the USB Type- C and USB Power Delivery specifications. Overall, the ANX7688 is designed as a single bridge IC from the HDMI2.0 and USB 3.1 interfaces of the Application Processors to enable a USB Type-C connector on mobile devices.
The ANX7688 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.
Main Features:
Standard compliance
DisplayPort1.3, HDMI2.0/1.4b, HDCP2.2/1.4, USB PD 2.0
Integrated USB Type-C support USB 2.0 (480Mbps)
USB3.1 Gen1 (5.0Gbps)
DisplayPort Alternate Mode
Simultaneous USB 3.1 Gen1 (5.0Gbps) and DisplayPort Alternate Mode
USB-PD 2.0 on CC wire
On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions
DisplayPort transmitter
DisplayPort transmitter (2-lanes @6.75Gbps)
Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rate
Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
Stereo (3D) video output support
AUXP, AUXN, and HPD support
HDCP2.2 and HDCP1.4 support
HDMI 2.0 receiver
Supports max pixel clock rates up to 600 Mpixels/sec
Up to 36bpp color depth support
Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
Up to 8-channels digital audio support
System operation
Reference input clock: 27MHz
Slave I2C device control interface
Built-in video BIST patterns and audio tone generator for system self-test
