ANX7517 is a USB Type-C to HDMI2.0b converter, which includes 3D display delivery capability. It can support up to 8.1Gbps lane speed in conjunction with any 4K@60 DP alternate mode USB-C source. ANX7517 transforms the DisplayPort output of a USB Type-C source device to HDMI or DVI output so that the device can connect to any high-definition TV, monitor, or projector.
Main Features:
Other Features
USB Type-C Specification 1.2 and backward compatible with Type-C specification 1.1
USB Power Delivery (PD) v3.0 Compliant
Integrated Channel Configuration (CC) and Power Delivery Logic (PD)
Support USB2.0 Billboard function
VESA DisplayPortTM (DP) v1.4 compliant receiver
1, 2 and 4 lanes up to HBR3 (8.1Gbps) input
1 MHz AUX Channel
Horizontal Blanking Expansion Operation
27dB insertion loss recovery
HDMI Specification v2.0b compliant transmitter
TMDS scrambling up to 600MHz pixel clock rate
Support up to 4096x2160@60Hz
SCDC (Status and Control Data Channel)
CEC2.0
Support CEC Tunneling-over-Aux
Support HDCP2.3, HDCP2.2 and HDCP1.4 repeater with HDCP keys inside
Video stream
Support High Dynamic Range (HDR) metadata
Support 3D timing
Audio Stream
Max audio sample rate of 192KHz x8 channels
8-ch LPCM, compressed audio (AC-3, DTS)
Integrated reference clock
On chip micro-controller (OCM) and integrated memory
Serial and debug interfaces
Support I2C Slave and master interface, up to 1MHz
ANX7510 is a DisplayPort1.4 to HDMI2.0b converter, which includes 3D display delivery capability. It can support up to 4 lanes of 5.4Gbps speed in conjunction with any 4K@60 DP alternate mode USB-C source. ANX7510 transforms the DisplayPort to HDMI or DVI so that the device can connect to any high-definition TV, monitor, or projector.
Main Features:
Other Features
VESA DisplayPortTM (DP) v1.4 compliant receiver
1, 2 and 4 lanes up to HBR3 (8.1Gbps) input
1 MHz AUX Channel
Horizontal Blanking Expansion Operation
27dB insertion loss recovery
HDMI Specification v2.0b compliant transmitter
TMDS scrambling up to 600MHz pixel clock rate
Support up to 4096x2160@60Hz
SCDC (Status and Control Data Channel)
CEC2.0
Support HDCP2.3, HDCP2.2 and HDCP1.4 repeater with HDCP keys inside
Video stream
Support High Dynamic Range (HDR) metadata
Support 3D timing
Audio Stream
Max audio sample rate of 192KHz x8 channels
8-ch LPCM, compressed audio (AC-3, DTS)
Integrated reference clock
On chip micro-controller (OCM) and integrated memory
Serial and debug interfaces
Support I2C Slave and master interface, up to 1MHz
ANX7497 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7497 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7497 integrates the DP Aux signal pass-through and is protocol aware for better link power management and power savings. ANX7497 integrates the local reference clock and AUX mux for switching DP AUX signals and reducing overall system BOM cost. ANX7497 can be deployed in various types of applications such as PCs, mobile, accessories, monitors, active cables and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™.
Main Features:
Other Features
Built-in re-timers
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Loss compensation to recover up to 27dB
Integrated AUX pass-through
Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
Integrated reference clock
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
DisplayPort 1.4a specification
Low-power design
Power supply at 1.8V
Core power supply at 1.2V
Package
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Accessories
Display/Panel
Notebook/Desktop PC
VR/AR
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
10G Active Mux (6x4) with Integrated Re-timers for USB3.2/DisplayPortl.4
Overview:
ANX7443 is a re-timing mux capable of switching DisplayPort (DP) and USB3.2 Gen 2 10Gbps signals to support a single USB Type-CTM (USB-CTM) port. ANX7443 has built-in re-timers to recover both the USB and DP signals with loss compensation of 23dB for USB and up to 27dB for DP. ANX7443 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timer eliminates jitter transfer and guarantee Gen 2 high-speed operation. Host (source) and device (sink) applications are fully supported by ANX7443 with built-in intelligent switching. With the intelligent digital switching, ANX7443 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector. ANX7443 integrates the local reference clock and SBU/AUX mux for switching DP AUX signals and reducing overall system BOM cost.
Main Features:
Other Features
Features
Built-in re-timers
Integrated re-timers for USB3.2 up to Gen 2 @ 10Gbps
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB3.2 Specification (Appendix-E)
Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss (USB), up to 27dB (DP)
Integrated mux
Integrated (6x4) mux switches USB and DP signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through GPIO of FLIP/USB_EN/DP_EN pins)
Integrated SBU/AUX mux for switching DisplayPort AUX +/- signals
Integrated reference clock
Serial control interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB3.2 specification, Appendix E
DisplayPort 1.4a specification
USB Type-C r1.2 specification
Intel USB3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Package
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
Commercial temperature range of OC to 70C
Applications:
Notebook/Desktop PC
Package:
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
