USB Type-C

ANX7411

USB-C Port Controller
USB-C
USB-C'" Port Controller
Overview: 

ANX7411 is a USB Type-C’" (USB-C) Port Controller that complies with the latest USB-C (r1.2) and USB-PD v3.0 (r1.0) specifications. ANX7411 integrates the logic to manage cable attach and detach, orientation, and role detection. The on- chip microcontroller (OCM) facilitates USB-PD v3.0 messaging for fast charging, DisplayPort" (DP) Alternate Mode (Alt Mode), and Vendor-Defined Messages (VDMs). ANX7411 integrates the MOSFETs for powering VCONN and the signals required to control external VBUS load switches. ANX7411 can be configured as a Downstream Facing Port (DFP) or a Dual- Role Port (DRP), making it an ideal solution for various applications such as notebooks, desktops, and 2-in-1 PCs. ANX7411 supports a TCPC-compliant register interface and utilizes its I2C Slave port for communication with an upstream embedded controller, CPU, or AP. ANX7411 is powered from a single flexible supply rail at 3.3V and is available in small QFN packages.

The ANX7411 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features: 
Other key features
  • TCPC-compliant hardware interface
  • Supports DFP and DRP modes for Host-only or Dual-Role applications
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • AUX CH/SBU Mux
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interfaces
    • I2C Master/Slave interface
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • DisplayPort 1.4 specification
    • DisplayPort Alternate Mode over USB Type-C r1.1 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power — 1.8V or 3.3V
    • Ultra-low power consumption (typical 77uW) in standby mode
  • On-chip microcontroller with reprogrammable memory for USB-PD v3.0 engine
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Dead battery detection support
  • Package
    • QFN-28, 4mm x 4mm, 0.8mm Z-height, 0.4mm pin-pitch
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • QFN-28, 4mm x 4mm, 0.8mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

ANX7447

Switches/Multiplexers
USB-C
USB Type-C™ Crosspoint Switch with On-chip Microcontroller
Overview: 

ANX7447 is an intelligent crosspoint switch that supports switching at data rates of up to 10Gbps. ANX7447 supports high- speed interfaces, such as USB 3.1 (Gen 1 — 5Gbps, Gen 2 — 10Gbps) and DisplayPort’” (DP) 1.4 at up to HBR3 (8.1Gbps). ANX7447 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebooks, desktops, and 2-in-1 PCs to use the reversible USB Type-C (USB-C") connectors. An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.2 and USB Power Delivery v3.0 specifications. ANX7447 can be configured for a Downstream Facing Port (DFP) or Dual-Role Port (DRP) to support a USB-C receptacle. In the DFP configuration, ANX7447 supports the DisplayPort Alternate Mode as defined by VESA* to carry high- definition audio and video (A/V) contents at 1, 2, or 4-lanes DP over the USB-C connector.

The ANX7447 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features: 
  • 4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
  • DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging
  • Native TCPC-compliant hardware register interface
  • Supports DFP and DRP modes for Host-only or Dual-Role applications
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interface
    • Slave interface
    • Direct Connect Interface (DCI) debug support
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • DisplayPort 1.4 specification
    • DisplayPort Alternate Mode over USB Type-C r1.1 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V
    • Ultra-low power consumption (typical 77uw) in standby mode
  • OCM to implement signal switching, USB-PD messaging, and DisplayPort related functions
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Dead battery detection support
  • Package
    • BGA-49 3.2mm x 3.2mm, 0.9mm Z-height, 0.4mm pin- pitch
    • QFN-48 6mm x 6mm, 0.8mm Z-height, 0.4mm pin-pitch
Applications: 

配件

笔记本/桌面PC

Package: 
  • BGA-49 3.2mm x 3.2mm, 0.9mm Z-height, 0.4mm pin- pitch
  • QFN-48 6mm x 6mm, 0.8mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

4L

ANX7490

Re-timers/Repeaters
USB-C
10G USB 3.1 Re-timer (1-Port)
Overview: 

ANX7490 is a USB 3.1 1-port re-timer capable of conditioning USB signals at both Gen 1 (5Gbps) and Gen 2 (10Gbps) speeds. ANX7490 can compensate signal loss of up to -23dB and is compliant to the latest USB 3.1 specifications. ANX7490 is protocol aware for better link power management and power savings. ANX7490 can be in various types of applications such as notebook/desktop PCs, server, and accessories/docks with various USB connectors such as Type-A, Type-B, or even USB Type-CTM (USB-CTM).

Main Features: 
Other key features
  • Built-in re-timers
    • Integrated re-timer for USB 3.1 1-port (Tx/Rx) up to 10Gbps
    • Loss compensation to recover up to 23dB channel loss
  • Protocol awareness for better link power management (LPM) and savings
  • Reference clock for re-timers
    • Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for re-timer configuration
    • DCI debug interface support
  • Industry standard compatibility
    • USB 3.1 specification, Appendix E
    • Intel USB 3.1 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated supply power pin for I/O power at 1.8V
  • Package
    • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
    • QFN-40, 5mm x 5 mm, 0.4mm pin-pitch
  • Industrial temperature range of -40C to 85C
  • Applications
    • Notebooks, desktops, server and accessories/docks
Applications: 

配件

笔记本/桌面PC

Package: 
  • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
  • QFN-40, 5mm x 5 mm, 0.4mm pin-pitch
Detailed Product Information: 

2L

ANX7625

Converters/Bridges
USB-C
MIPI-DSI/DPI to USB Type-C™ Bridge (Port Controller with MUX)
Overview: 

ANX7625 is a mobile HD transmitter designed for portable devices such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, and so on. It enables a mobile device to transfer audio, video, and data simultaneously. The ANX7625 converts MIPI™ to DisplayPort™ 1.3 high-performance video with the resolution up to 4K UHD. The built-in intelligent crosspoint switch provides support for USB Type-C, USB 3.1 data transfer, and the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, its on-chip microcontroller (OCM) provides the capabilities to manage signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol, and other functions defined in the USB Type-C and USB Power Delivery specifications. Overall, the ANX7625 is designed as a single bridge IC between MIPI interface and USB 3.1 interface of the Application Processors to allow for a USB Type-C connector on mobile devices.

The ANX7625 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features: 
  • Standard compliance
    • USB Type-C 1.2, DisplayPort 1.3, MIPI-DSI 1.3, MIPI-DPI 2.0, HDCP 2.2 and 1.4, USB-PD 3.0, VESA® DSC 1.1
  • Integrated USB Type-C support
    • USB3.1 Gen1 (5.0 Gbps)
    • DisplayPort Alternate Mode
    • Simultaneous USB 3.1 Gen1 (5.0 Gbps) and DisplayPort Alternate Mode
    • USB-PD 3.0 on CC wire
    • On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions
  • DisplayPort transmitter
    • DisplayPort transmitter (2-lanes @ 6.75 Gbps)
    • Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rates
    • Video resolution supported: up to 4K (4096x2160p30) or Ultra-HD (3840x2160p30)
    • AUXP and AUXN support
    • HDCP2.2 and 1.4 support
  • Digital audio and video input
    • MIPI-DSI (4-lanes) at 1.5 Gbps/lane
    • MIPI-DPI 12-bit double data rate with the maximum pixel clock rates up to 150 Mpixels/sec
    • DSC with 3:1 or 2:1 compression ratio
    • I2S: up to 8-channel, 192 kHz digital audio support with TDM format
  • System operation
    • Reference input clock: 26 MHz and 27 MHz
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power supply
    • 1.0V, 1.8V, and 3.0V
  • Package options: 64 VFBGA
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Package: 
  • 64 VFBGA
Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

MIPI-DSI 1.02

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.1)

HDMI 1.2

HDCP

Power Requirements: 
  • 1.0V, 1.8V, and 3.0V
Detailed Product Information: 

ANX7430

Re-timers/Repeaters
USB-C
10G Active Mux (1x2) with Integrated Re-timer for U SB 3.1
Overview: 


ANX7430 is a USB 3.1 Gen 2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7430 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. Digital muxing is supported by ANX7430 to ensure the enhanced signals from the re-timer are preserved and outputted over the USB-C connector.
 

Main Features: 
Other key features
  • Built-in re-timers
    • Integrated re-timers for USB 3.1 up to Gen 2 @ 10Gbps
    • Loss compensation to recover up to 23dB channel loss
  • Integrated mux
    • Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
    • Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)
  • Reference clock for re-timers
    • Utilizes a 24MHz crystal or 1.05V swing single-ended clock source
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for mux and re-timer configuration
    • DCI debug interface support
  • Industry standard compatibility
    • USB 3.1 specification, Appendix E
    • USB Type-C r1.2 specification
    • Intel USB 3.1 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated 3.3V power for DCI interface
    • Dedicated supply power pin for I/O power at 1.8V
  • Packages
    • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
    • QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
    • QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
  • Industrial temperature range of -40C to 85C
Applications: 

配件

笔记本/桌面PC

存储器/服务器

Package: 
  • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
  • QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
  • QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

4L

ANX7688

Converters/Bridges
USB-C
HDMI to USB Type-CTM Bridge (Port Controller with MUX)
Overview: 

ANX7688 is an ultra-low power 4K Ultra-HD (4096x2160p60) mobile HD transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, etc. ANX7688 supports simultaneous audio, video, and data transfer from a mobile device. ANX7688 converts HDMITM 2.0 to DisplayPortTM 1.3 Ultra-HD (4096x2160p60) including an intelligent crosspoint switch to support USB Type-CTM (USB-CTM). The integrated crosspoint switch supports USB 3.1 data transfer along with the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, an on-chip microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol support and other functions as defined in the USB Type- C and USB Power Delivery specifications. Overall, the ANX7688 is designed as a single bridge IC from the HDMI2.0 and USB 3.1 interfaces of the Application Processors to enable a USB Type-C connector on mobile devices.

The ANX7688 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features: 
  • Standard compliance
    • DisplayPort1.3, HDMI2.0/1.4b, HDCP2.2/1.4, USB PD 2.0
  • Integrated USB Type-C support  USB 2.0 (480Mbps)
    • USB3.1 Gen1 (5.0Gbps) 
    • DisplayPort Alternate Mode
    • Simultaneous USB 3.1 Gen1 (5.0Gbps) and DisplayPort Alternate Mode
    • USB-PD 2.0 on CC wire
    • On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions 
  • DisplayPort transmitter
    • DisplayPort transmitter (2-lanes @6.75Gbps)
    • Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rate
    • Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Stereo (3D) video output support
    • AUXP, AUXN, and HPD support
    • HDCP2.2 and HDCP1.4 support
  • HDMI 2.0 receiver
    • Supports max pixel clock rates up to 600 Mpixels/sec
    • Up to 36bpp color depth support
    • Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
    • Up to 8-channels digital audio support
  • System operation
    • Reference input clock: 27MHz
    • Slave I2C device control interface
    • Built-in video BIST patterns and audio tone generator for system self-test
  • Power supply requirements
    • 1.0V, 1.8V, and 3.3V
    • Package options: VFBGA
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

HDMI 1.2

HDCP

Detailed Product Information: 

2ch

ANX7402

USB-C Port Controller
USB-C
USB Power Delivery PHY with Channel Configuration Control
Overview: 

ANX7402 is a USB Power Delivery (USB-PD) PHY with an On-chip Microcontroller (OCM). The OCM enables ANX7402 to manage the cable detection, USB Power Delivery negotiations, Vendor Defined Message (VDM) communication protocol, and other functions, as defined in the USB Type-C™ v1.1 and USB Power Delivery v2.0 specifications. ANX7402 supports a Hot Plug Detect (HPD) input pin and converts the HPD signal over the Configuration Channel (CC) to enable DisplayPort™ (DP) Alt Mode applications. When paired with a DP-to-HDMI/VGA bridge (such as the ANX7737/9837) and a USB Billboard device IC, the ANX7402 creates an ideal solution for USB Type-C (USB-C™) dongle and docking station applications.

Main Features: 
  •  On-chip Microcontroller (OCM) to implement cable detection and USB-PD messaging for charging related functions
  •  5V-tolerant CC/VCONN signals
  •  Dead battery charging support
  •  I2C slave mode to support external MCU/IC
  •  VBUS control and USB_ID pins to control external switch, Power Management Integrated Circuits (PMICs) or USB charger IC based on    the USB-PD configuration 
  •  3.3V power supply (1.0V Core power generated by internal regulator)
  •  Supports the following
    •  USB Power Delivery Specification v2.0 on CC wire
    •  HPD input pin and conversion over CC for DP Alt Mode applications
  •  Designed to the following specifications 
    •  USB Type-C Cable and Connector Specification  v1.1
    •  USB Power Delivery Specification v2.0
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Standards Compliance: 

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

ANX7418

Switches/Multiplexers
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7418 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7418 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPortTM (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7418 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C. An integrated microcontroller (MCU) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.0 and USB Power Delivery v2.0 specifications. ANX7418 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual-Role Port (DRP) to support a USB Type-C receptacle. In the DFP configuration, ANX7418 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1 or 2-lanes DP over the USB Type-C connector. 

Main Features: 
  • High-speed switching up to 6.75Gbps
  • 2-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps 
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
  • Embedded MCU to implement signal switching, USB- PD messaging, and DisplayPort related functions
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • I2C master and GPIOs to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply for analog part (1.0V Core power generated by internal regulator)
  • 3.3V or 1.8V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • DisplayPort Alternate Mode on USB Type-C
    • Standard (rev 1.0) Pin Assignments C, D, E and F
    • USB Power Delivery Specification v2.0 on CC wire
  • Compliant with the following
    • DisplayPort 1.3 PHY and electrical specifications
    • USB Type-C Cable and Connector Specification (rev 1.0)
  • USB Power Delivery Specification v2.0 (rev 1.0)
  • USB 3.1 Gen 1 electrical specifications 
Applications: 

智能手机/平板电脑

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

4L

ANX7428

Switches/Dual 3:2 Mux
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7428 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7428 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPort™ (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7428 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C (USB-C™). An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.1 and USB Power Delivery v2.0 specifications. ANX7428 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual- Role Port (DRP) to support a USB-C receptacle. In the DFP configuration, ANX7428 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1, 2, or 4-lanes DP over the USB-C connector.

Main Features: 
  • High-speed switching up to 6.75Gbps
  • 4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
  • On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and DisplayPort related functions 
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • VBUS control and USB_ID pins to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply (1.0V Core power generated by internal regulator)
  • 1.8V~3.3V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • DisplayPort Alternate Mode on USB Type-C Standard (rev 1.0) Pin Assignments C, D, E and F
    • USB Power Delivery Specification v2.0 on CC wire
  • Designed to the following specifications 
    • DisplayPort 1.3 PHY and electrical specifications
    • USB Type-C Cable and Connector Specification v1.1
    • USB Power Delivery Specification v2.0
    • USB 3.1 Gen 1 electrical specifications 
Applications: 

配件

笔记本/桌面PC

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

4L

ANX7408

Switches/Multiplexers
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7408 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7408 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps). ANX7408 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C (USB-CTM). An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions as defined in the USB Type-C v1.1 and USB Power Delivery v2.0 specifications. ANX7408 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual-Role Port (DRP) to support a USB-C receptacle

Main Features: 
Other key features
  • High-speed switching up to 6.75Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and related functions
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • VBUS control and USB_ID pins to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply for analog part (1.0V Core power generated by internal regulator)
  • 1.8V~3.3V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • USB Power Delivery Specification v2.0 on CC wire
  • Compliant with the following
    • USB Type-C Cable and Connector Specification (rev 1.1)
    • USB Power Delivery Specification v2.0
    • USB 3.1 Gen 1 electrical specifications 
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Standards Compliance: 

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

4L