ANX7418 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7418 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPortTM (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7418 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C. An integrated microcontroller (MCU) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.0 and USB Power Delivery v2.0 specifications. ANX7418 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual-Role Port (DRP) to support a USB Type-C receptacle. In the DFP configuration, ANX7418 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1 or 2-lanes DP over the USB Type-C connector.
Main Features:
High-speed switching up to 6.75Gbps
2-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
Embedded MCU to implement signal switching, USB- PD messaging, and DisplayPort related functions
5V-tolerant CC/VCONN signals
Dead battery charging support
I2C slave mode to support external MCU/IC
I2C master and GPIOs to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
3.3V power supply for analog part (1.0V Core power generated by internal regulator)
3.3V or 1.8V power supply for digital IO
Supports the following
USB 3.1 signal switching
DisplayPort Alternate Mode on USB Type-C
Standard (rev 1.0) Pin Assignments C, D, E and F
USB Power Delivery Specification v2.0 on CC wire
Compliant with the following
DisplayPort 1.3 PHY and electrical specifications
USB Type-C Cable and Connector Specification (rev 1.0)
USB Power Delivery Specification v2.0 (rev 1.0)
USB 3.1 Gen 1 electrical specifications
Applications:
智能手机/平板电脑
Standards Compliance:
DisplayPort 1.3 PHY and electrical specifications
USB 3.1 Gen 1 electrical specifications
USB Power Delivery Specification v2.0 (rev 1.0)
USB Type-C Cable and Connector Specification (rev 1.0)
ANX7428 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7428 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPort™ (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7428 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C (USB-C™). An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.1 and USB Power Delivery v2.0 specifications. ANX7428 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual- Role Port (DRP) to support a USB-C receptacle. In the DFP configuration, ANX7428 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1, 2, or 4-lanes DP over the USB-C connector.
Main Features:
High-speed switching up to 6.75Gbps
4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and DisplayPort related functions
5V-tolerant CC/VCONN signals
Dead battery charging support
I2C slave mode to support external MCU/IC
VBUS control and USB_ID pins to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
3.3V power supply (1.0V Core power generated by internal regulator)
1.8V~3.3V power supply for digital IO
Supports the following
USB 3.1 signal switching
DisplayPort Alternate Mode on USB Type-C Standard (rev 1.0) Pin Assignments C, D, E and F
USB Power Delivery Specification v2.0 on CC wire
Designed to the following specifications
DisplayPort 1.3 PHY and electrical specifications
USB Type-C Cable and Connector Specification v1.1
USB Power Delivery Specification v2.0
USB 3.1 Gen 1 electrical specifications
Applications:
配件
笔记本/桌面PC
Standards Compliance:
DisplayPort 1.3 PHY and electrical specifications
USB 3.1 Gen 1 electrical specifications
USB Power Delivery Specification v2.0 (rev 1.0)
USB Type-C Cable and Connector Specification (rev 1.0)
