4L

ANX7497

Re-timers/Repeaters
USB-C
8.1G (up to HBR3) DisplayPortTM 4-lane Re-timer
Overview: 

ANX7497 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7497 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7497 integrates the DP Aux signal pass-through and is protocol aware for better link power management and power savings. ANX7497 integrates the local reference clock and AUX mux for switching DP AUX signals and reducing overall system BOM cost. ANX7497 can be deployed in various types of applications such as PCs, mobile, accessories, monitors, active cables and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™.

Main Features: 
Other Features
  • Built-in re-timers
    • Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps. Supports both transparent mode and non-transparent mode (transparent or LTTPR)
    • Loss compensation to recover up to 27dB
  • Integrated AUX pass-through
    • Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
  • Integrated reference clock
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for mux and re-timer configuration
  • Industry standard compatibility
    • DisplayPort 1.4a specification
  • Low-power design
    • Power supply at 1.8V
    • Core power supply at 1.2V
  • Package
    • QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
  • Commercial temperature range of OC to 70C 
Applications: 

配件

显示屏/面板

笔记本/桌面PC

VR/AR头戴设备

Package: 

QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch

Detailed Product Information: 

ANX7437

Switches/Multiplexers
USB-C
USB Type-C™ Crosspoint Switch with On-chip Microcontroller
Overview: 

ANX7437 is an intelligent crosspoint switch that supports switching at data rates of up to 10Gbps. ANX7437 supports highspeed interfaces, such as USB 3.1 (Gen 1 – 5Gbps, Gen 2 – 10Gbps). ANX7437 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebooks, desktops, and 2-in-1 PCs to use the reversible USB Type-C (USB-C™) connectors. An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.2 and USB Power Delivery v3.0 specifications. ANX7437 can be configured for a Downstream Facing Port (DFP) or Dual-Role Port (DRP) to support a USB-C receptacle.

Main Features: 
Other Features
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
  • Native TCPC-compliant hardware register interface
  • Supports DFP and DRP modes for Host-only or Dual-Role applications
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interfaces
    • Slave interface
    • Direct Connect Interface (DCI) debug support
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V
    • Ultra-low power consumption (typical 80uW) in standby mode
  • On-chip Microcontroller (OCM) to implement signal switching and USB-PD messaging
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Package offered: 48-pin QFN, 6mm x 6mm, 0.8mm Z-height, pin-pitch: 0.4mm
Applications: 

配件

笔记本/桌面PC

Package: 
  • 48-pin QFN, 6mm x 6mm, 0.8mm Z-height, pin-pitch: 0.4mm
Detailed Product Information: 

ANX7447

Switches/Multiplexers
USB-C
USB Type-C™ Crosspoint Switch with On-chip Microcontroller
Overview: 

ANX7447 is an intelligent crosspoint switch that supports switching at data rates of up to 10Gbps. ANX7447 supports high- speed interfaces, such as USB 3.1 (Gen 1 — 5Gbps, Gen 2 — 10Gbps) and DisplayPort’” (DP) 1.4 at up to HBR3 (8.1Gbps). ANX7447 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebooks, desktops, and 2-in-1 PCs to use the reversible USB Type-C (USB-C") connectors. An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.2 and USB Power Delivery v3.0 specifications. ANX7447 can be configured for a Downstream Facing Port (DFP) or Dual-Role Port (DRP) to support a USB-C receptacle. In the DFP configuration, ANX7447 supports the DisplayPort Alternate Mode as defined by VESA* to carry high- definition audio and video (A/V) contents at 1, 2, or 4-lanes DP over the USB-C connector.

The ANX7447 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features: 
  • 4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, 6.75Gbps, 8.1Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) and Gen2 (10Gbps) link speed
  • DisplayPort Alternate Mode (SlimPort®) communication support through USB-PD structured VDM messaging
  • Native TCPC-compliant hardware register interface
  • Supports DFP and DRP modes for Host-only or Dual-Role applications
  • Integrated VCONN FETs
  • Built-in 10-bit ADC to monitor VBUS voltage and current
  • Dedicated control signals for VBUS Source FET, VBUS sink FET, and VBUS auto discharge circuity
  • Serial and debug interface
    • Slave interface
    • Direct Connect Interface (DCI) debug support
  • Industry standard compatibility
    • USB Type-C r1.2 specification
    • USB Power Delivery v3.0 r1.0 specification
    • DisplayPort 1.4 specification
    • DisplayPort Alternate Mode over USB Type-C r1.1 specification
    • Universal Serial Bus (USB) Type-C Port Controller Interface r1.0 specification
  • Low-power design
    • Single supply at 3.3V
    • Dedicated supply power pin for flexible I/O power – 1.8V or 3.3V
    • Ultra-low power consumption (typical 77uw) in standby mode
  • OCM to implement signal switching, USB-PD messaging, and DisplayPort related functions
    • 64K bytes SRAM for firmware execution
    • 128K bytes Flash for firmware storage
    • PDFU function for firmware updating
  • Dead battery detection support
  • Package
    • BGA-49 3.2mm x 3.2mm, 0.9mm Z-height, 0.4mm pin- pitch
    • QFN-48 6mm x 6mm, 0.8mm Z-height, 0.4mm pin-pitch
Applications: 

配件

笔记本/桌面PC

Package: 
  • BGA-49 3.2mm x 3.2mm, 0.9mm Z-height, 0.4mm pin- pitch
  • QFN-48 6mm x 6mm, 0.8mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

ANX7496

Re-timers/Repeaters
USB-C
8.1G DisplayPort™ 4-lanes Re-timer
Overview: 

ANX7496 is a DisplayPort 4-lane re-timer capable of conditioning DP signals up to 8.1Gbps (supports HBR3, HBR2, HBR, RBR rates). ANX7496 can compensate signal loss of up to 27dB and can operate in either DP transparent mode or Link-Trainable Tunable PHY Repeater (LTTPR) mode. ANX7496 integrates the DP AUX signal pass-through and is protocol aware for better link power management and power savings. ANX7496 can be in various types of applications such as PCs, mobile, accessories, monitors, and VR HMDs with various connectors such as mini-DP, standard-DP, or even USB Type-C™ (USB-C™).

Main Features: 
Other key features
  • Built-in re-timers
    • Integrated re-timers (Link training-tunable PHY repeater) for DisplayPort up to HBR3 @ 8.1Gbps
    • Supports both transparent mode and non-transparent mode (transparent or LTTPR)
    • Loss compensation to recover up to 27dB channel loss
  • Integrated AUX pass-through
    • Integrated AUX detection for link training and protocol awareness for better link power management (LPM)
  • Reference clock for re-timer
    • Utilizes a 24MHz reference XTAL or 1.05V single-ended clock source
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for re-timer configuration
  • Industry standard compatibility
    • DisplayPort 1.4 specification Low-power design
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated supply power pin for I/O power at 1.8V Packages
  • Commercial temperature range of 0C to 70C

Applications: 

配件

笔记本/桌面PC

VR/AR头戴设备

Notebooks, desktops, and 2-in-1s
Package: 
  • BGA-56, 4.0mm x 4.5mm, 0.5mm ball-pitch
  • QFN-60, 7.0mm x 7.0mm, 0.85mm Z-height, 0.4mm pin-pitch
Power Requirements: 
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated supply power pin for I/O power at 1.8V
Detailed Product Information: 

ANX7430

Re-timers/Repeaters
USB-C
10G Active Mux (1x2) with Integrated Re-timer for U SB 3.1
Overview: 


ANX7430 is a USB 3.1 Gen 2 10G active mux with integrated re-timer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7430 also integrates a mux (1x2) for USB Type-C™ (USB-C™) applications. Digital muxing is supported by ANX7430 to ensure the enhanced signals from the re-timer are preserved and outputted over the USB-C connector.
 

Main Features: 
Other key features
  • Built-in re-timers
    • Integrated re-timers for USB 3.1 up to Gen 2 @ 10Gbps
    • Loss compensation to recover up to 23dB channel loss
  • Integrated mux
    • Digital (1x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
    • Mux control input through I2C commands from external I2C master (or, optionally through FLIP/OP_MODE pins)
  • Reference clock for re-timers
    • Utilizes a 24MHz crystal or 1.05V swing single-ended clock source
  • Serial and debug interfaces
    • I2C Slave interface, up to 1MHz, for mux and re-timer configuration
    • DCI debug interface support
  • Industry standard compatibility
    • USB 3.1 specification, Appendix E
    • USB Type-C r1.2 specification
    • Intel USB 3.1 Repeater and Active Switch specification
  • Low-power design
    • Analog power supply at 1.8V
    • Dedicated 3.3V power for DCI interface
    • Dedicated supply power pin for I/O power at 1.8V
  • Packages
    • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
    • QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
    • QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
  • Industrial temperature range of -40C to 85C
Applications: 

配件

笔记本/桌面PC

存储器/服务器

Package: 
  • BGA-42, 3.5mm x 4.0mm, 0.5mm ball-pitch
  • QFN-48, 6mm x 6mm, 0.85mm Z-height, 0.4mm pin-pitch
  • QFN-60, 7mm x 7mm, 0.85mm Z-height, 0.4mm pin-pitch
Detailed Product Information: 

ANX7418

Switches/Multiplexers
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7418 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7418 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPortTM (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7418 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C. An integrated microcontroller (MCU) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.0 and USB Power Delivery v2.0 specifications. ANX7418 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual-Role Port (DRP) to support a USB Type-C receptacle. In the DFP configuration, ANX7418 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1 or 2-lanes DP over the USB Type-C connector. 

Main Features: 
  • High-speed switching up to 6.75Gbps
  • 2-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps 
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
  • Embedded MCU to implement signal switching, USB- PD messaging, and DisplayPort related functions
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • I2C master and GPIOs to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply for analog part (1.0V Core power generated by internal regulator)
  • 3.3V or 1.8V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • DisplayPort Alternate Mode on USB Type-C
    • Standard (rev 1.0) Pin Assignments C, D, E and F
    • USB Power Delivery Specification v2.0 on CC wire
  • Compliant with the following
    • DisplayPort 1.3 PHY and electrical specifications
    • USB Type-C Cable and Connector Specification (rev 1.0)
  • USB Power Delivery Specification v2.0 (rev 1.0)
  • USB 3.1 Gen 1 electrical specifications 
Applications: 

智能手机/平板电脑

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

ANX7428

Switches/Dual 3:2 Mux
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7428 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7428 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps) and DisplayPort™ (DP) 1.3 at up to HBR2.5 (6.75Gbps). ANX7428 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C (USB-C™). An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions, as defined in the USB Type-C v1.1 and USB Power Delivery v2.0 specifications. ANX7428 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual- Role Port (DRP) to support a USB-C receptacle. In the DFP configuration, ANX7428 supports the DisplayPort Alternate Mode as defined by VESA® to carry high-definition audio and video (A/V) contents at 1, 2, or 4-lanes DP over the USB-C connector.

Main Features: 
  • High-speed switching up to 6.75Gbps
  • 4-lanes DisplayPort inputs with link speed of 1.62Gbps, 2.7Gbps, 5.4Gbps, and 6.75Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • DisplayPort Alternate Mode communication support through USB-PD structured VDM messaging
  • On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and DisplayPort related functions 
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • VBUS control and USB_ID pins to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply (1.0V Core power generated by internal regulator)
  • 1.8V~3.3V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • DisplayPort Alternate Mode on USB Type-C Standard (rev 1.0) Pin Assignments C, D, E and F
    • USB Power Delivery Specification v2.0 on CC wire
  • Designed to the following specifications 
    • DisplayPort 1.3 PHY and electrical specifications
    • USB Type-C Cable and Connector Specification v1.1
    • USB Power Delivery Specification v2.0
    • USB 3.1 Gen 1 electrical specifications 
Applications: 

配件

笔记本/桌面PC

Standards Compliance: 

DisplayPort 1.3 PHY and electrical specifications

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: 

ANX7408

Switches/Multiplexers
USB-C
USB Type-C Crosspoint Switch
Overview: 

ANX7408 is an intelligent crosspoint switch that supports switching at data rates of up to 6.75Gbps. ANX7408 supports high-speed interfaces, such as USB 3.1 (Gen 1 – 5Gbps). ANX7408 is designed as a companion IC to various CPUs and Application Processors (APs) to enable notebook PCs, tablets, and smartphones to use mobile connectors such as the reversible USB Type-C (USB-CTM). An On-chip Microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD) charging and Vendor Defined Message (VDM) protocol, and other functions as defined in the USB Type-C v1.1 and USB Power Delivery v2.0 specifications. ANX7408 can be configured for a Downstream Facing Port (DFP), Upstream Facing Port (UFP), or Dual-Role Port (DRP) to support a USB-C receptacle

Main Features: 
Other key features
  • High-speed switching up to 6.75Gbps
  • USB 3.1 signal (SSTX and SSRX) with Gen1 (5Gbps) link speed
  • On-chip Microcontroller (OCM) to implement signal switching, USB-PD messaging, and related functions
  • 5V-tolerant CC/VCONN signals
  • Dead battery charging support
  • I2C slave mode to support external MCU/IC
  • VBUS control and USB_ID pins to control external Power Management Integrated Circuits (PMICs) or USB charger IC based on the USB-PD configuration
  • 3.3V power supply for analog part (1.0V Core power generated by internal regulator)
  • 1.8V~3.3V power supply for digital IO
  • Supports the following
    • USB 3.1 signal switching
    • USB Power Delivery Specification v2.0 on CC wire
  • Compliant with the following
    • USB Type-C Cable and Connector Specification (rev 1.1)
    • USB Power Delivery Specification v2.0
    • USB 3.1 Gen 1 electrical specifications 
Applications: 

配件

笔记本/桌面PC

智能手机/平板电脑

Standards Compliance: 

USB 3.1 Gen 1 electrical specifications

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.0)

Detailed Product Information: