6ch

ANX7625

MIPI-DSI/DPI to USB Type-C™ Bridge (Port Controller with MUX)

Overview:

ANX7625 is a mobile HD transmitter designed for portable devices such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, and so on. It enables a mobile device to transfer audio, video, and data simultaneously. The ANX7625 converts MIPI™ to DisplayPort™ 1.3 high-performance video with the resolution up to 4K UHD. The built-in intelligent crosspoint switch provides support for USB Type-C, USB 3.1 data transfer, and the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, its on-chip microcontroller (OCM) provides the capabilities to manage signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol, and other functions defined in the USB Type-C and USB Power Delivery specifications. Overall, the ANX7625 is designed as a single bridge IC between MIPI interface and USB 3.1 interface of the Application Processors to allow for a USB Type-C connector on mobile devices.

The ANX7625 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features:

Standard compliance
- USB Type-C 1.2, DisplayPort 1.3, MIPI-DSI 1.3, MIPI-DPI 2.0, HDCP 2.2 and 1.4, USB-PD 3.0, VESA® DSC 1.1
Integrated USB Type-C support
- USB3.1 Gen1 (5.0 Gbps)
- DisplayPort Alternate Mode
- Simultaneous USB 3.1 Gen1 (5.0 Gbps) and DisplayPort Alternate Mode
- USB-PD 3.0 on CC wire
- On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions
DisplayPort transmitter
- DisplayPort transmitter (2-lanes @ 6.75 Gbps)
- Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rates
- Video resolution supported: up to 4K (4096x2160p30) or Ultra-HD (3840x2160p30)
- AUXP and AUXN support
- HDCP2.2 and 1.4 support
Digital audio and video input
- MIPI-DSI (4-lanes) at 1.5 Gbps/lane
- MIPI-DPI 12-bit double data rate with the maximum pixel clock rates up to 150 Mpixels/sec
- DSC with 3:1 or 2:1 compression ratio
- I2S: up to 8-channel, 192 kHz digital audio support with TDM format
System operation
- Reference input clock: 26 MHz and 27 MHz
- Slave I2C device control interface
- Built-in video BIST patterns and audio tone generator for system self-test
Power supply
- 1.0V, 1.8V, and 3.0V
Package options: 64 VFBGA

Applications:

配件

笔记本/桌面PC

智能手机/平板电脑

Package:

64 VFBGA

Standards Compliance:

DisplayPort 1.3 PHY and electrical specifications

MIPI-DSI 1.02

USB Power Delivery Specification v2.0 (rev 1.0)

USB Type-C Cable and Connector Specification (rev 1.1)

HDMI 1.2

HDCP

Power Requirements:

1.0V, 1.8V, and 3.0V

Detailed Product Information:

AA-002291-PB-6-ANX7625_ProductBrief.pdf

ANX7688

AA-002281-PB-6-ANX7688_Product_Brief.pdf

HDMI to USB Type-CTM Bridge (Port Controller with MUX)

Overview:

ANX7688 is an ultra-low power 4K Ultra-HD (4096x2160p60) mobile HD transmitter designed for portable devices, such as smartphones, tablets, Ultrabooks, docking stations, sports cameras, camcorders, etc. ANX7688 supports simultaneous audio, video, and data transfer from a mobile device. ANX7688 converts HDMITM 2.0 to DisplayPortTM 1.3 Ultra-HD (4096x2160p60) including an intelligent crosspoint switch to support USB Type-CTM (USB-CTM). The integrated crosspoint switch supports USB 3.1 data transfer along with the DisplayPort Alternate Mode signaling over USB Type-C. Additionally, an on-chip microcontroller (OCM) is available to manage the signal switching, Channel Configuration (CC) detection, USB Power Delivery (USB-PD), Vendor Defined Message (VDM) protocol support and other functions as defined in the USB Type- C and USB Power Delivery specifications. Overall, the ANX7688 is designed as a single bridge IC from the HDMI2.0 and USB 3.1 interfaces of the Application Processors to enable a USB Type-C connector on mobile devices.

The ANX7688 can be adopted by Intel, AMD, Qualcomm, MTK platform designs.

Main Features:

Standard compliance
- DisplayPort1.3, HDMI2.0/1.4b, HDCP2.2/1.4, USB PD 2.0
Integrated USB Type-C support  USB 2.0 (480Mbps)
- USB3.1 Gen1 (5.0Gbps)
- DisplayPort Alternate Mode
- Simultaneous USB 3.1 Gen1 (5.0Gbps) and DisplayPort Alternate Mode
- USB-PD 2.0 on CC wire
- On-chip microcontroller to implement USB-PD messaging and DisplayPort related functions
DisplayPort transmitter
- DisplayPort transmitter (2-lanes @6.75Gbps)
- Configurable 1-lane or 2-lane output supports: HBR2.5, HBR2, HBR, and RBR data rate
- Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
- Stereo (3D) video output support
- AUXP, AUXN, and HPD support
- HDCP2.2 and HDCP1.4 support
HDMI 2.0 receiver
- Supports max pixel clock rates up to 600 Mpixels/sec
- Up to 36bpp color depth support
- Up to Ultra-HD (3840x2160p60) or 4K (4096x2160p60) maximum video resolution
- Up to 8-channels digital audio support
System operation
- Reference input clock: 27MHz
- Slave I2C device control interface
- Built-in video BIST patterns and audio tone generator for system self-test
Power supply requirements
- 1.0V, 1.8V, and 3.3V
- Package options: VFBGA

Applications: