ANX7580 is a low-power mobile HD receiver targeted primarily for single display protocol conversion from DisplayPort to MIPI. With a 4-lane DisplayPort1.4 input and a single MIPI Output with 3:1 DSC support, ANX7580’s feature set is optimized to meet the high performance requirements for current and next generation single and dual clamshell display applications as well as Head-Mounted Displays (HMD) for Augmented Reality (AR) and Virtual Reality. Moreover, with data rate support of up to 6.75Gbps on its DisplayPort input, ANX7580 is an ideal companion device for SlimPort transmitters currently implemented in many leading smart phones. The ANX7580 can also supports eDP on its input making it an ideal converter for x86 based mobile platforms.
Main Features:
Other Features
Standard compliance
DisplayPort1.4, HDCP2.2/1.4
MIPI-DSI 1.2 and D-PHY 1.1
DisplayPort Receiver
DisplayPort1.4 receiver
Configurable 1, 2 or 4-lane input supports: HBR2.5 (6.75Gbps), HBR2 (5.4Gbps), HBR (2.7Gbps), and RBR (1.62Gbps) data rates
Horizontal left / right line splitting
3D stereo modes
HDCP2.2 and HDCP1.4 support
Resolution
DisplayPort Receiver Input Bandwidth supports up to 4K x 2K x 60Hz
ANX9807 is an ultra low power DP/eDP transmitter designed for motherboards. Any portable mobile device with an embedded ANX9807 device would be able to connect to any DP/eDP receiver through a passive cable as defined by DP/eDp specification.
Main Features:
Digital video input
24-bits single data rate (SDR) or 18-bits double data rate (DDR) input video mode in LVCMOS
Pixel clock rate up to 270Mpixels/sec
Up to 36 bits per pixel video (DDR mode)
Digital video output
DisplayPort 1.2 output
Configurable 2 lanes, with each lane supports data rate of 5.4Gbps, 2.7Gbps, or 1.62Gbps
AUX channel link bandwidth up to 1Mbps
Resolution up to 2500*1600(WQXGA)@60Hz
System operation
Slave I2C control interface
0°C to +75°C operating temperature Power management
Power management
1.2V and 2.5V power supply
Standby power consumption lower than 15mW Active power consumption lower than 210mW (QXGA)
Built-in video BIST patterns for system self-test Package: 8 x 8 mm 81-ball BGA (0.8 pitch)
ANX9804 is a low power dual mode DVO/LVTTL to DisplayPort/HDMI™ transmitter product designed for motherboard. The proprietary circuit technique adopted by ANX9804 makes the power consumption extreme low. With its low power consumption, it can fit into very small form factor devices that fit into modern lifestyle. ANX9804, a first in its class product, can be used in conjunction with ANX9835 (DisplayPort to DisplayPort/HDMI replicator) and ANX9815 (DisplayPort receiver) to provide end-to-end interface connectivity.
Main Features:
Output Interface
Dual Mode: DisplayPort™ or HDMI™ output
1/2/4 lane operation at up to HBR (2.7 Gbps/lane) and RBR (1.62 Gbps/lane)
DisplayPort™ mode Spread Spectrum Clock (SSC) support
Support up to 2560 X 1600 (WQXGA) @ 60Hz with 30bpp colour depth
YCbCr to RGB conversion
4:4:4 and 4:2:2 data input formats
18/24/30/36 bits per pixel video support
Embedded audio support
Fully integrated HDCP encryption for DisplayPort™ and HDMI™ modes
Input Interface
24-bit DVO/LVTTL flexible video input
SDR and DDR data modes support
Deep colour up to 36bpp in DDR support
Audio Input Interface
S/PDIF audio mode including two-channel uncompressed L-PCM and multi-channel compressed DTS support
32, 44.1, 48, 88.2, 96, 176.4 to 192KHz audio
Fully integrated HDCP hardware and keys shared for DisplayPort and HDMI modes
Built-in video pattern generator and audio tone generator for system self-test
