ANX2403

Features

eDP receiver

• Integrated high-speed DP-Rx compliant with DisplayPort standard eDP v1.4
• Up to 2 lanes @2.7Gbps, 2.16Gbps, 2.43Gbps and 1.62Gbps
• PSR/MBO/PSR2 function through built-in SRAM Source IC interface: CEDS/iSP/EPI/ATPI
• Up to 12 pairs to support 6-channel 2D/1C or 12-channel 1D/1C configuration
• CEDS/iSP/EPI/ATPI transmitter up to 2.0Gbps configuration
• Various swap modes: inter-port swap, intra-port swap, p/n swap, RGB swap, odd/even pixel swap, etc.
• Scan direction swap
• Supports Z-inversion (column inversion), and N-line inversion
• Dual gate mode combined with Z-inversion and non-Z inversion mode
• CEDS/iSP/EPI/ATPI test pattern mode TCON functions
• HD (1366x768), HD+ (1600x900), FHD (1920x1080), 1920x1280
• eDP TCON color depth: 18/24bpp input (30bpp input for HDR), 18/24bpp output
• Programmable fail-safe mode control
• Configurable BIST pattern
• 10-bit Gamma correction table for each color
• Multiple FRC pattern configurations
• 8bit->6bit, 9bit->6bit, 10bit->8bit and 10bit->6bit FRC modes
• 0-D dimming control (DBC) function for backlight low power
• Color-engine for hue and saturation control
• LCD overdrive to reduce motion blur in high-performance mode
• Direct drive G-sync, Free sync, and Adaptive sync
• eDP sDRRS power saving function
• Splash-screen feature
• In-cell Touch function combined with PSR
• Microsoft/Wacom In-cell timing requirement On-chip SSCG
• CEDS/EPI/iSP/ATPI 1.6G ＜Fceds ≤2G (Max. +/-0.5% with 0.25% step, 10/20/30/40KHz, center spreading)
• CEDS/EPI/iSP/ATPI Fceds≤1.6G (Max. +/-1% with 0.25% step, 10/20/30/40KHz, center spreading)

Intel HDR400

• EOTF ST.2084 Decoder
• BT.2020 to sRGB color space mapping
• 10-bit input and 8-bit output
• DPCD handshake

Pattern detection

EEPROM shared for EDID and configuration

In-cell touch support for Microsoft and Wacom

PWM generator, PWM pass-through and PWM product modes

TSMC 28nm HPC+ process

Lowest power from 60mW to 80mW (depending on whether PSR is on or off)