20G Active Mux (2x2) with Integrated Re-timer and CC Detection for USB 3.2
Overview:
ANX7434 is a USB 3.2 Gen 2 20G active mux with integrated re-timer and CC Detection capable of recovering the USB signals with loss compensation of up to 23dB. ANX7434 specifically supports Gen 2x2 for USB Type-CTM (USB-CTM) applications. ANX7434 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7434. With the integrated SRIS re-timer function and x2 USB support, ANX7434 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Built-in re-timers
Integrated re-timer for USB 3.2 up to Gen 2 @ 2x10Gbps for a combined 20G data throughput
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification (Appendix-E)
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
TCPC-compliant hardware interface
Supports DFP and UFP USB-C applications
Dedicated control signals for VBUS Source FET
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification, Appendix E
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Commercial temperature range of 0C to 70C
Applications:
Notebook/Desktop PC
Storage/Server
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
ANX7432 is a USB3.2 Gen2 20G active retimer capable of recovering the USB signals with loss compensation of up to 23dB. ANX7432 also integrates a mux to enable the following configurations: (Gen 1x2, Gen 2x1 and Gen 2x2) for USB Type-CTM (USB-CTM) applications. ANX7432 supports Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) architectures for a hybrid implementation for Gen 1 and Gen 2. SRIS re-timers eliminate jitter transfer and guarantee Gen 2 operation. Host (source) and device (sink) USB-C data-only applications are fully supported by ANX7432 with built-in intelligent switching. With the intelligent digital switching, ANX7432 ensures the enhanced signals from the re-timers are preserved and outputted over the USB-C connector.
Main Features:
Built-in re-timers
Integrated re-timer for USB 3.2 with two lanes up to Gen2 @ 10Gbps each for a combined 20G throughput
Supports both Separate Reference Clock Independent SSC (SRIS) and Bit-Level Re-timer (BLR) Architectures of USB 3.2 Specification
Supports both host (source) and device (sink) applications in USB-C subsystems
Loss compensation to recover up to 23dB channel loss
Integrated mux
Digital (2x2) mux switches USB signals and preserves enhanced signal output over USB-C connector
Mux control input through I2C commands from external I2C master (or, optionally through FLIP/USB_EN pins)
Integrated Reference CLK
Serial and debug interfaces
I2C Slave interface, up to 1MHz, for mux and re-timer configuration
Industry standard compatibility
USB 3.2 specification
USB Type-C r1.2 specification
Intel USB 3.2 Repeater and Active Switch specification
Low-power design
Analog power supply at 1.8V
I/O power supply at 1.8V
Core power supply at 1.2V
Commercial temperature range of 0C to 70C
Applications:
Notebook/Desktop PC
Storage/Server
Package:
QFN-50, 4.7mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
QFN-60, 6.4mm x 6.4mm, 0.90mm Z-height, 0.35mm pin-pitch
