The ANX7750 is a SlimPort to DisplayPort lane converter. It takes a 1-lane SlimPort (@HBR2.5 rate) input and converts it to 4-lane DisplayPort (@HBR rate) output. ANX7750 works in conjunction with SlimPort transmitters, such as ANX7805, ANX7808, ANX7812, ANX7814, ANX7816, ANX7836, and more. ANX7750 is particularly suited for seamless plug-and-play to legacy DisplayPort (@HBR rate) HDTV, monitors, and projectors.
Main Features:
Standard compliance
DisplayPort, MyDP, HDCP
SlimPort/MyDP/DisplayPort receiver
1-lane high-speed differential input with configurable speed: HBR2.5, HBR2, HBR, or RBR
Video up to 4K@30Hz resolution
Spread Spectrum Clocking (SSC) support
Stereo (3D) video input support Single wire AUXP (C-WIRE) sideband communication
HDCP content protection
DisplayPort transmitter
1-, 2-, or 4-lane high-speed differential output with configurable speed: HBR or RBR
Stereo (3D) video input support
HDCP content protection
System operation
Integrated On-chip Microcontroller (OCM) for software free operation
ANX9807 is an ultra low power DP/eDP transmitter designed for motherboards. Any portable mobile device with an embedded ANX9807 device would be able to connect to any DP/eDP receiver through a passive cable as defined by DP/eDp specification.
Main Features:
Digital video input
24-bits single data rate (SDR) or 18-bits double data rate (DDR) input video mode in LVCMOS
Pixel clock rate up to 270Mpixels/sec
Up to 36 bits per pixel video (DDR mode)
Digital video output
DisplayPort 1.2 output
Configurable 2 lanes, with each lane supports data rate of 5.4Gbps, 2.7Gbps, or 1.62Gbps
AUX channel link bandwidth up to 1Mbps
Resolution up to 2500*1600(WQXGA)@60Hz
System operation
Slave I2C control interface
0°C to +75°C operating temperature Power management
Power management
1.2V and 2.5V power supply
Standby power consumption lower than 15mW Active power consumption lower than 210mW (QXGA)
Built-in video BIST patterns for system self-test Package: 8 x 8 mm 81-ball BGA (0.8 pitch)
